How to install the goal targets

The following are instructions to set up the FITLIGHT® Hockey Targets properly. Follow these instructions for the best results and prevent false activations and damage that could occur if improperly installed.

Contents:

• Hi-Impact polycarbonate target(s)
• Bungee cord(s)
• Black rubber ring(s)
• Light clip(s)
• Tie wrap(s)

1. Insert the bungee cords to the targets as shown in Step #1 below.

2. Attach the light clip to the bungee cords with two tie wraps. Do not overtighten the tie wraps; you would like the bungee cord to slide through the tie wraps. Cut off any excess tie wrap.

3. Insert the rubber ring into the target.

4. Insert the light into the target.

5. Twist the light clip onto the light.

6. Attach the bungee to the goal and slide the target into the required position.

You can also reference this video